|
|
|
|
 Posted:May 25 2003, 05:58 PM |
|
|
Any one got and EF/EL and done a cam conv on it. I have an XR6 machined cam but am looking for something a bit more lumpy. Any suggestions.
Thanks |
| mx68u
|
| Admin |
 |
| Group: Admin |
| Posts: 1128 |
| Member No.: 1 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
 |
|
| Posted:May 25 2003, 06:46 PM |
|
|
welcome to the board FTR 
i believe evilchief has had his cam just installed.. i think he did a bit of research so he'll be able to help you out 
If your part of the ATFC member group just message me so i can add you
|
| EvilChief
|
| The Evil One |
|
| Group: ATFC Moderator |
| Posts: 223 |
| Member No.: 146 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
 |
|
| Posted:May 26 2003, 07:45 AM |
|
|
Yea i did my research and found that crow cams appear to be the most suitable. there are 3 stages, stage 1 and 2 need only minimal to no changes to the head and ecu, whereas stage 3 needs some big changes to teh flow in the head, timing and ecu. www.crow.com.au
(BTW stage 3 is lumpy as hell ...)
--------------------
WHOHOO ... got my opens today ... as much as it would matter to me anyway
... and 96 in the ash tray! |
| FTR_EL
|
| Newbie |
|
| Group: ATFC Member |
| Posts: 4 |
| Member No.: 246 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
|
|
 Posted:May 26 2003, 06:13 PM |
|
|
Any one know of any body in WA that fit cams - dont know of many myself
--------------------
Bring it on |
| mx68u
|
| Admin |
|
| Group: Admin |
| Posts: 1128 |
| Member No.: 1 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
|
|
| Posted:May 26 2003, 06:38 PM |
|
|
| your local mechanic should have a problem? its the tuning with the cams that i would be more worried about? if you go to wild you will probably need a fuel pressure regulator to squeeze a lil more fuel in, u didnt need any sort of modz to your ecu/fuel system evil by any chance? |
| EvilChief
|
| The Evil One |
|
| Group: ATFC Moderator |
| Posts: 223 |
| Member No.: 146 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
|
|
| Posted:May 26 2003, 10:49 PM |
|
|
yea i am onto the fuel prob ATM ... ill will go and try to remap the system with a chip next if it doesnt solve the prob i gonna go and fit a malpassi asjustable fuel pressure reg that will get rid of it for sure (except if my fuel pump will give up on me ... mhm 600HP bosh pump here i come  ). Anyhow fitting and dialing in of teh cams should be able to be done by and mechanic there is no bicki about it, but getting the ecu remapped/tuned is a bastard, especially u gotta run in teh gear first b4 u can do that ... so thats a fun time of driving easy of course!
--------------------
WHOHOO ... got my opens today ... as much as it would matter to me anyway
... and 96 in the ash tray! |
| EvilChief
|
| The Evil One |
|
| Group: ATFC Moderator |
| Posts: 223 |
| Member No.: 146 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
|
|
| Posted:Jun 23 2003, 06:41 PM |
|
|
updates: https://www.totalrpm.com/forums/index.html?s...st=0&#entry4913
--------------------
WHOHOO ... got my opens today ... as much as it would matter to me anyway
... and 96 in the ash tray! |
