|
Welcome Guest ( Log In | Register )
|
|
|
 |
Stud Pattern Size For Te Cortina |
|
|
|
| EvilChief
|
| The Evil One |
 |
| Group: ATFC Moderator |
| Posts: 223 |
| Member No.: 146 |
Car Profile: Available
|
| Status: Offline |
|
|
|
|
 |
|
| Posted:May 14 2003, 04:06 AM |
|
|
SikXC:
Does anyone know the specifications for the stud pattern size on a TE cortina?
tinav8:
I'm pretty sure that from stud centre to adjacent stud centre is 77mm. If you have a standard set of Ghia alloys it is printed on there. I couldn't find the specs in the Workshop Manual so I measured them with the verniers. Wheel offset is vital if you are thinking of aftermarket Rims.
SikXC:
cheers. thats why i wanted it so i can get some aftermarket rims later on.
Cort Short:
Ford Mondeo rims have the same pcd (pitch circle diameter) as Cortys and the correct offset. However, you may find that unless your rear axle is EXACTLY centred on the body that you need to roll the guard lips to get enough tyre clearance if you go larger than 205 mm wide.
pcman:
cortina stud paters in 108mmx4pcd
with 63.3mm center bore and 35-38mm offset
cheers
pcman
--------------------
WHOHOO ... got my opens today ... as much as it would matter to me anyway
... and 96 in the ash tray! |
|
| 0 User(s) are reading this topic (0 Guests and 0 Anonymous Users) |
| 0 Members: |
| 2 replies since May 14 2003, 04:06 AM |
|
|
|
|
